HP Proliant Server ML30 G10
اچ پی پرولینت سرور ام ال 30 جی 10
شروع قیمت: 154,000,000 ریال
قیمت فروش ویژه: 152,600,000 ریال
سرور HPE Proliant ML30 G10 دستگاهی جمع و جور، به صورت ایستاده و طراحی شده برای پردازنده اینتل Xeon E، پردازنده های پنتیوم و Core i3 است که یک ترکیب منحصر به فرد از قابلیت های به روز و قیمت مناسب را فراهم می کند. این انعطاف پذیری، پیکربندی فوق العاده را ارائه می دهد تا برای طیف وسیعی از نیازهای تجاری در یک قیمت مقرون به صرفه عرضه شود. در این سیستم از طریق اتوماسیون، سریعترین وظایف ضروری مدیریت چرخه حیات سرور را با HPE iLO 5 با سهولت حفظ کنید. جهت دریافت قیمت سرور اچ پی از قسمت تماس با ما در تماس باشید.
Processor family :
Intel Xeon E Processor Intel 8th Gen Core i3 Processors Intel Pentium Processor G Series |
Cache Memory :
12MB (1x12MB) Level 3 |
Chipset :
Intel® C246 Chipset |
Upgradeability :
One of the following depending on model Up to 4 DIMM slots available for higher memory capacity Up to 4LFF (+2LFF optional) non hot-plug, 4LFF hot-plug, or 8SFF hot-plug drive bays HPE Smart Array or Smart HBA Controller Redundant Power Supply Dedicated iLO Management Port M.2 NVMe SSDs for boot |
On System Management Chipset :
HPE iLO 5 ASIC |
Memory Protection :
Memory Protection |
Memory :
Type: |
Network Controller :
Embedded 2-Port 1GbE HPE Ethernet 332i Adapter, optional 1/10Gb standup card. |
Optional Raid Controller :
Essential RAID Controllers HPE Smart Array E208i-a SR G10 LH Controller HPE Smart Array E208e-p SR Gen10 Controller Performance RAID Controllers HPE Smart Array P408i-a SR G10 LH Controller HPE Smart Array P408e-p SR Gen10 Controller |
Storage Controller :
Software RAID HPE Smart Array S100i SR Gen10 Software RAID NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22. NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled by selecting 784308-B21. NOTE: The S100i is a 14-port SATA controller, but only 12 ports are accessible as 2 are leveraged to support the 2 M.2 options on the Primary Riser. NOTE: The S100i supports windows only. NOTE: For Linux users, HPE offers a solution that uses in-distro open-source software to create a two-disk RAID |
Internal Storage Devices :
Optical Drives : None ship standard Optional: SATA 9.5mm DVD-RW/DVD-ROM Optical Drive Hard Drives : None ship standard |
Maximum Internal Storage :
STORAGE CAPACITY CONFIGURATION Hot Plug LFF SAS 56 TB (4 x 14 TB) Hot Plug LFF SATA 56 TB (4 x 14 TB) Hot Plug SFF SAS 19.2 TB (8 x 2.4 TB) Hot Plug SFF SATA 16 TB (8 x 2 TB) Non Hot Plug LFF SATA 24 TB (4 x 4 TB + 2 x 4 TB (with additional optional LFF drive enablement kits)) Hot Plug LFF SATA SSD 7.68 TB (4 x 1.92 TB) Hot Plug SFF SAS SSD 3.2 TB (8 x 400 GB) Hot Plug SFF SATA SSD 61.44 TB (8 x 7.68 TB) M.2 NVMe SSD 480 GB (1 x 480 GB) NOTE: M.2 SSD is applicable to all models. |
Interfaces :
Serial 1 port – Optional Video 1 Rear – VGA port (standard on all chassis types) Network Ports 2x 1GbE embedded NIC (standard on all chassis types) iLO Remote Mgmt Port 1 Gb Dedicated – Optional USB 3.0 6 USB ports (standard) Rear: 4xUSB 3.0 |
Industry Standard Compliance :
ACPI 6.1 Compliant PCIe 3.0 Compliant PXE Support WOL Support Microsoft® Logo certifications VGA Port USB 3.0 Compliant USB 2.0 Compliant SMBIOS 3.1 UEFI 2.6 ASHRAE A3/A4 NOTE: For additional technical thermal details regarding ambient temperatures, humidity and features support please visit: http://www.hpe.com/servers/ashrae. UEFI (Unified Extensible Firmware Interface Forum) NOTE: UEFI is the default for the ML30 Gen10. Legacy mode can be selected in the field or as a CTO option (758959-B22) |
Common Slot Power Supply :
HPE 350W E-star 1.0 Power Supply FIO Kit HPE 500W Flex Slot Platinum Hot Plug Low Halogen Redundant Power Supply NOTE: Available in 94% efficiency. HPE Entry-Level Power Supplies provide lower-cost options for customers trying to balance their need for enterprise class efficiency and reliability while maintaining lowest possible hardware costs. All Entry-Level power supply options have been designed specifically for HPE ProLiant Gen10 Essential Series servers. The HPE 350W FIO Power Supply is the standard, non-redundant AC power supply option for most HPE ProLiant Gen10 Essential servers. It features Bronze-level (85%) certified power efficiency with a set of features optimized for the Gen10 Essential-series tower servers. HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to “right-size” a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid “trapped” power capacity in the data center. |
System Fans :
1 Default system fan module (92 x 32 mm) 1 Default PCI fan module (92 x 32 mm) depending on models NOTE: PCI fan module is part of HPE ML30 Gen10 PCI Fan and Baffle Kit (P06303-B21) which is included in SMB Performance and Solution Models. NOTE: HPE ML30 Gen10 PCI Fan and Baffle Kit (P06303-B21) is required as follows: 1. Must be selected in 4LFF Hot Plug CTO Server and 8SFF Hot Plug CTO Server. 2. Must be selected in 4LFF NHP CTO Server and SMB Entry Model if M.2 SSD or any PCIe card (NIC, Smart Array Controller, graphic card, etc.) is selected except 1Gb network adapters. |
Operating Systems and Virtualization Software Support for ProLiant Servers :
Microsoft Windows Server 2016 and 2019 Red Hat Enterprise Linux (RHEL) 7.5 SUSE Linux Enterprise Server (SLES) 12 SP3 and 15 VMware ESXi 6.5 U2 and 6.7 NOTE: VMware supported only with Intel® Xeon® E processors, not supported with Intel® Core™ or Pentium® processors. ClearOS HPE and ClearCenter will help you lower the cost of building on-premise solutions without sacrificing security and ease of use. HPE ProLiant servers with ClearOS give you a simple, secure, and affordable operating system with an intuitive web-based graphical user interface that provides a cloud-like experience on-premise, and an Application Marketplace with over 100 apps and growing. Whether you’re starting out or scaling, you decide what applications you need and pay as you grow. NOTE: ClearOS allows you to build a fully functional server that is just right for you at no upfront cost. For more information on ClearOS, please visit http://www.hpe.com/servers/clearos. CentOS NOTE: CentOS not directly supported / Community Supported (Based on RHEL so RHEL testing and enablement applicable to CentOS) CentOS 7.5. NOTE: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server. https://www.hpe.com/us/en/servers/server-operating-systems.html. |
Graphics :
Integrated Matrox G200 video standard Video modes up to 1920 x 1200 @ 60 Hz (32 bpp) HPE iLO 5 on system management memory 32 MB Flash |
Form Factor :
4U Tower NOTE: Sliding Shelf – 874578-B21 is optional to support rack form factor. |
Embedded Management :
HPE Integrated Lights-Out (HPE iLO) Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO. Learn more at http://www.hpe.com/info/ilo. UEFI Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI). Learn more at http://www.hpe.com/servers/uefi. Intelligent Provisioning Hassle free server and OS provisioning for one or more servers with Intelligent Provisioning. Learn more at http://www.hpe.com/servers/intelligentprovisioning. iLO RESTful API iLO RESTful API is Redfish API conformance and offers simplified server management automation such as configuration and maintenance tasks based on modern industry standards. Learn more at http://www.hpe.com/info/restfulapi. Server Utilities Active Health System The HPE Active Health System (AHS) is an essential component of the iLO management portfolio that provides continuous, proactive health monitoring of HPE servers. Learn more at http://www.hpe.com/servers/ahs. Active Health System Viewer Use the Active Health System Viewer, a web-based portal, to easily read AHS logs and speed problem resolution with HPE self-repair recommendations, to learn more visit: http://www.hpe.com/servers/ahsv. Smart Update Keep your servers up to date with the HPE Smart Update solution by using Smart Update Manager (SUM) to optimize the firmware and driver updates of the Service Pack for ProLiant (SPP). Learn more at http://www.hpe.com/info/smartupdate. iLO Amplifier Pack Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO Amplifier Pack is a free, downloadable open virtual application (OVA) that delivers the power to discover, inventory and update Gen8, Gen9 and Gen10 HPE servers at unmatched speed and scale. Use with an iLO Advanced License to unlock full capabilities. Learn more at http://www.hpe.com/servers/iLOamplifierpack. HPE iLO Mobile Application Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: http://www.hpe.com/info/ilo/mobileapp. RESTful Interface Tool RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API to discover and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool. Scripting Tools Provision one to many servers using your own scripts to discover and deploy with Scripting Tool (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at http://www.hpe.com/servers/stk orhttp://www.hpe.com/servers/powershell. HPE OneView Standard HPE OneView Standard can be used for inventory, health monitoring, alerting, and reporting without additional fees. It can monitor multiple HPE server generations. The user interface is similar to the HPE OneView Advanced version, but the software-defined functionality is not available. Learn more at http://www.hpe.com/info/oneview. NOTE: HPE OneView on DL20 Gen10 will be available in 1H 2019. HPE Systems Insight Manager (HPE SIM) Ideal for environments already using HPE SIM, it allows you to monitor the health of your HPE ProLiant Servers and HPE Integrity Servers. Also provides you with basic support for non-HPE servers. HPE SIM also integrates with Smart Update Manager to provide quick and seamless firmware updates. Learn more at http://www.hpe.com/info/hpesim. |
HP Server utilities :
HP Smart Update HP Systems Insight Manager (HP SIM) HP OneView Standard Scripting Tool Kit and Windows PowerShell HP RESTful Interface Tool HP iLO Mobile Application HP Insight Online |
Security :
UEFI Secure Boot and Secure Start support |
Guaranty :
یکسال گارانتی تعویض سخت افزار و سه سال پشتیبانی رایگان نرم افزار |
Warranty :
ده سال خدمات پس از فروش |